Solar panels are designed to generate electricity for decades, but certain electrical and environmental conditions can accelerate performance losses. One issue that can affect photovoltaic (PV) modules is potential induced degradation (PID).
Unlike visible damage from hail or broken glass, PID can reduce solar panel output without obvious external signs. It is particularly relevant for high-voltage solar installations, where electrical potential differences can create stress within PV modules.
Understanding the causes, symptoms, and prevention of PID helps solar installers, developers, and asset owners protect long-term system performance.

Explore U.S. Solar State Rankings
Compare solar rankings, installed capacity, growth trends, and market performance across all 50 states. Discover regional insights to support smarter procurement and expansion decisions.
Table of Contents
What Is Potential Induced Degradation in Solar Panels?
Potential induced degradation is a form of solar module deterioration associated with voltage differences between photovoltaic cells and grounded components, such as module frames.
These electrical conditions can cause charge movement or ion migration within a module, affecting the electrical properties of its solar cells.
As a result, the panel may generate less power than expected.
PID is not a single failure mechanism. Different solar cell technologies can experience different forms of degradation, including shunting, polarization, and corrosion-related effects.
The severity depends on module construction, operating voltage, environmental exposure, and cell technology.
What Causes Potential Induced Degradation?
Several factors can increase the likelihood or severity of PID.
1. High system voltage
In a solar array, individual modules operate at different electrical potentials relative to ground.
High voltage differences can create electrical stress across module materials, encouraging unwanted charge movement or ion migration.
The effect depends on voltage polarity and module design, not simply the system’s rated voltage.
2. Heat and humidity
Elevated temperatures and moisture can accelerate certain PID mechanisms.
Humidity may influence electrical leakage pathways through module packaging and surfaces, while temperature affects material behavior and ion mobility.
These conditions can make PID a particular concern in hot, humid environments.
3. Module materials and construction
Solar cells, encapsulants, glass, and other materials influence resistance to PID.
Certain material combinations may be more susceptible to ion migration or changes in surface passivation.
Modern module designs incorporate materials and manufacturing processes intended to reduce these risks.
How Does PID Affect Solar Panel Performance?
PID can reduce the electrical output of affected modules, lowering the energy generated by a solar installation.
Depending on the degradation mechanism, its effects may include reduced current, lower voltage, or a decline in maximum power.
For example, a module originally producing 500W under specified test conditions might produce 450W after experiencing a hypothetical 10% power loss.
Power loss (%) = (Original power − Measured power) ÷ Original power × 100
(500W − 450W) ÷ 500W × 100 = 10%
This example illustrates how degradation is calculated. It does not represent a typical or guaranteed PID loss.
Actual degradation varies considerably between modules and operating conditions.
How to Detect PID in Solar Panels
PID can be difficult to identify through visual inspection alone. Electrical testing and specialized imaging are generally more useful.
| Diagnostic method | What it reveals | Main limitation |
|---|---|---|
| I-V curve tracing | Changes in voltage, current, and maximum power | Abnormal curves are not unique to PID |
| Electroluminescence imaging | Patterns of electrically inactive or degraded cell regions | Requires specialized equipment |
| Infrared thermography | Temperature differences and possible hot spots | Cannot independently confirm PID |
| Performance monitoring | Unexpected energy losses or declining output | Other system faults can produce similar symptoms |
| Laboratory PID testing | Susceptibility under controlled voltage stress | Does not exactly reproduce field conditions |
I-V curve testing
An I-V curve tracer measures the relationship between current and voltage across a solar module or string.
According to Fluke’s troubleshooting guidance, PID may produce a degraded or flattened I-V curve, sometimes accompanied by reduced open-circuit voltage (Voc) or short-circuit current (Isc).
However, shading, soiling, damaged connections, and other module faults can produce similar symptoms.
Technicians should compare measurements against expected performance while accounting for irradiance and temperature.
Electroluminescence testing
Electroluminescence (EL) imaging can reveal abnormal emission patterns associated with certain PID mechanisms.
It is especially useful when combined with electrical measurements and other diagnostic evidence.
How to Prevent Potential Induced Degradation
Preventing PID begins with equipment selection and appropriate system design.
Choose PID-resistant modules. Review manufacturer test reports and product documentation for resistance to potential-induced degradation.
Evaluate voltage and grounding arrangements. System electrical design can influence module potential relative to ground. Any changes must comply with equipment specifications and electrical safety requirements.
Use compatible mitigation technology. Certain inverter configurations and dedicated anti-PID devices can help reduce electrical stress or support recovery in suitable systems.
Monitor system performance. Regular performance analysis and electrical testing can identify unexpected degradation before losses become more extensive.
Review environmental exposure. Module selection should account for local temperature, humidity, and installation conditions.
When sourcing equipment, solar professionals can compare solar panels available through Sunhub and review manufacturer specifications, testing documentation, and warranty conditions.
Can Solar Panels Recover From PID?
Some forms of PID are partially or substantially reversible, while others may cause lasting damage.
Recovery depends on the underlying mechanism, module technology, and severity of degradation.
For example, certain polarization-related effects can recover under appropriate electrical or illumination conditions.
Other mechanisms involving material damage or corrosion may be difficult or impossible to reverse completely.
Anti-PID equipment should therefore not be treated as a universal repair solution.
Before implementing mitigation, installers should confirm compatibility with the inverter, module technology, and manufacturer’s requirements.
PID Testing Standards for Solar Panels
The International Electrotechnical Commission provides standardized procedures for evaluating module susceptibility to PID.
IEC TS 62804-1:2025 covers crystalline silicon photovoltaic modules and includes methods addressing PID-shunting and PID-polarization.
IEC TS 62804-2:2022 addresses PID testing for thin-film modules.
These procedures expose modules to controlled electrical and environmental stress to assess their response.
Passing a laboratory test provides useful evidence of resistance but does not guarantee that a module will never experience PID in actual operating conditions.
Conclusion
Potential induced degradation in solar panels is an important reliability concern, particularly for high-voltage PV systems.
It develops through electrical stress associated with voltage differences between solar cells and grounded components, with temperature, humidity, and module construction influencing the outcome.
Although potential induced degradation may not produce visible damage, it can reduce module power output and overall system energy production.
Selecting appropriately tested modules, designing compatible electrical systems, and monitoring performance can help reduce the risk.
For solar developers, installers, and equipment buyers, understanding potential induced degradation supports more reliable procurement decisions and long-term system performance.
Frequently Asked Questions
Is PID the same as normal solar panel degradation?
No. PID is associated with specific electrical stress mechanisms, while normal aging can involve several unrelated physical and chemical processes.
Can PID permanently damage solar panels?
Yes. Some PID mechanisms can cause lasting damage, although certain forms may be partially or substantially reversible.
Does PID affect every solar panel?
No. Susceptibility varies with cell technology, module materials, electrical design, and operating conditions.
How can installers confirm PID?
Technicians typically combine I-V curve testing, performance analysis, and specialized imaging. Laboratory evaluation may be needed to distinguish potential induced degradation from other defects.
Sources
- Fluke : Troubleshooting PV Systems Using I-V Curve Tracers
- International Electrotechnical Commission : IEC TS 62804-1:2025
- International Electrotechnical Commission : IEC TS 62804-2:2022
- Fraunhofer ISE : Evaluation of PID in Modules and Power Plants
- IEA PVPS Task 13 : Degradation and Failure Modes in New Photovoltaic Cell and Module Technologies (2025)



